NZ Sprocket Supplier. Contact us today!
If you are looking for a NZ sprocket supplier, then call us today. We have on the shelf hundreds of sprockets to suit roller and conveyor chains. We import and in-house manufacture sprockets to suit your custom requirements. Our NZ sprocket service covers the entire country. Contact us today with your sprocket enquiry. Toll free 0800 102 112
Roller Chain Sprockets NZ
ANSI and BS precision roller chain sprockets can be supplied with teeth that are flame heat treated, case hardened, induction hardened or not hardened at all.
The surface finish can be plain, painted, zinc plated or black passivated.
We stock a large range of roller chain sprockets in simplex, duplex and triplex strand widths to suit both British Standard (BS) and American Standard (ASA/ANSI) roller chains.
Simplex, Duplex & Triplex with specials on request.
Pitch Size (inches) | British Standard (BS) | American Standard (ANSI) |
1/4" | 04B | ANSI 25 |
5/16" | 05B | - |
3/8" | 06B | ANSI 35 |
1/2" | 08B | ANSI 40 |
5/8" | 10B | ANSI 50 |
3/4" | 12B | ANSI 60 |
1" | 16B | ANSI 80 |
1 1/4" | 20B | ANSI 100 |
1 1/2" | 24B | ANSI 120 |
1 3/4" | 28B | ANSI 140 |
2" | 32B | ANSI 160 |
2 1/4" | - | ANSI 180 |
2 1/2" | 40B | ANSI 200 |
3" | 48B | ANSI 240 |
Conveyor Chain Sprockets NZ
We stock and fabricate plate wheels and conveyor chain sprockets in NZ, in standard & non-standard configurations from materials such as mild steel, Hardox 400 abrasion resistant plate, induction hardened C1045 & specialist plastics.
Solid & split type sprockets. Accurately cut profiles to match the chain, attachments and the application requirements for long-service life.
Short delivery times, a full selection of materials. Machining and welding services available to customise your sprocket.
Our conveyor chain sprockets cover 78, 82, 111, 124, 132, 150, 157 WR/WH/WRC, XHD and IBR series chains.
Conveyor chain sprockets for NZ.
Download our conveyor chain sprocket information guide.
Take a look at one of our North American suppliers, CAN-AM chains sprocket brochure.
Drag Chain Sprockets NZ
Welded steel drag chain runs best on full width “drum” or “can” type sprockets.
We stock drums and through hardened, full length, profiled teeth ready for sprocket manufacture. Full width teeth promote longer service life.
All sprockets can be fabricated to suit your individual requirements.
Tooth count & profiles, flanges, bosses, bores, taper locks, key-ways & set screws for both drive & idler sprockets.
Chain Number | Number of Teeth | Pitch Diameter (inches) | Max. Bore (inches) | Tooth Face (inches) |
WD-102 Pitch = 5.000" | 6 8 9 10 12 13 | 10.00 13.07 14.62 16.18 19.32 20.89 | 3 15/16 5 15/16 5 15/16 5 15/16 5 15/16 5 15/16 | 6 3/8 6 3/8 6 3/8 6 3/8 6 3/8 6 3/8 |
WD-104 Pitch = 6.000" | 8 9 10 11 | 15.68 17.54 19.42 21.30 | 4 15/16 5 15/16 5 15/16 5 15/16 | 4 1/8 4 1/8 4 1/8 4 1/8 |
WD-110 Pitch = 6.000" | 6 8 9 10 11 | 12.00 15.68 17.54 19.42 21.30 | 4 7/16 5 15/16 5 15/16 5 15/16 5 15/16 | 9 9 9 9 9 |
WD-112 Pitch = 8.000" | 7 8 9 | 18.44 20.90 23.39 | 4 15/16 5 15/16 5 15/16 | 9 9 9 |
WD-116 Pitch = 8.000" | 7 8 9 | 18.44 20.90 23.39 | 5 7/16 5 15/16 5 15/16 | 13 13 13 |
WD-118 Pitch = 8.000" | 7 8 9 | 18.44 20.90 23.39 | 5 7/16 5 15/16 5 15/16 | 13 13 13 |
WD-120 Pitch = 6.000" | 6 8 11 | 12.00 15.68 21.30 | 5 15/16 5 15/16 5 15/16 | 8 3/4 8 3/4 8 3/4 |
WD-122 Pitch = 8.000" | 6 7 9 | 16.00 18.44 23.39 | 5 7/16 5 7/16 5 7/16 | 8 3/4 8 3/4 8 3/4 |
WD-480 Pitch = 8.000" | 6 7 8 9 11 | 16.00 18.44 20.90 23.39 28.40 | 5 7/16 5 7/16 5 15/16 5 15/16 5 15/16 | 11 11 11 11 11 |
2.609″ Pitch Uni-Sprockets NZ
For 2.609” pitch chains such as 81X, WH78, LXS882, C188 & H78 series chains, Supply Services Limited has a range of induction hardened universal sprockets on the shelf for immediate dispatch. Call us now 0800 102 112
Induction hardened teeth increase service life. 8-16 tooth available in A plates, B boss, C boss or split for bolting.
2.609″ pitch uni-sprockets for NZ.
Download our information guide on our steel uni-sprockets and steel split uni-sprockets.
Chain Name (2.609" pitch) | Uni-Sprocket Tooth Count | Uni-Sprocket A Plates | Uni-Sprocket B & C Boss | Uni-Sprocket Split Type, C-Boss, 4-Bolt |
81X, 81XH, 81XHH, WR78, C188, LXS882, H78A, H78B | 8,9,10,11,12,13,14,15,16 | Yes | Yes | Yes |
2.609″ Pitch Polymer Sprockets NZ
Polymer sprockets manufactured from super strong Northane 75D polyurethane to suit a range of 2.609″ pitch conveyor chains such as 81X, WH78, LXS882, C188 & H78.
Available in split type configuration for ease of installation, these polymer sprockets are lightweight, long lasting, quiet & half the cost of a split steel sprocket.
We stock these sprockets in 9, 12, 13 & 14 tooth counts with drive hubs and replaceable bearing inserts for a variety of shaft sizes.
The full range of 2.609″ polymer sprockets & associated components are stocked in NZ and ready to be shipped to your site.
Our split poly sprockets along with our metal uni-sprockets are two of the most popular sprocket types we supply.
2.609″ pitch polymer sprockets for NZ.
Download our information sheet on 2.609″ pitch polymer sprockets.
Tooth Count | Bushing Diameter Available | Bushing Length Available |
9T, 12T, 13T, 14T | 1 7/16" 1 15/16" 1 15/16" 2 3/16" 2 3/16" 2 7/16" 2 7/16" 2 15/16" 50mm 60mm | 3" 3" 4" 3" 4" 3" 4" 3" 3" 3" |
Shaft Diameter | Key Size | Bushing Length |
1 15/16" 2 7/16" 50mm 60mm | 1/2" 5/8" 14mm 18mm | 3" |
Bushing Diameter | Bushing Length |
1 7/16" 1 15/16" 1 15/16" 2 3/16" 2 3/16" 2 7/16" 2 7/16" 2 15/16" 50mm 60mm | 3" 3" 4" 3" 4" 3" 4" 3" 3" 3" |
Chanex® Oregon Bends (perfect for idler sprocket replacements)
Oregon bends formed from UHMWPE Chanex® profiles are excellent low-cost alternatives to sprockets on the bottom of board singulators.
Various sizes are available for C2060 chains to 81X, WR/WH78 and H78 series chains.
Chanex® Oregon Bends reduce idler sprocket replacement costs, extend chain life and offer quieter site operation due to reduced noise.
Download our information sheet on our Chanex® Oregon Bends/Chain Guides.
Custom sizes can be made by us locally in NZ.
Description | Inside Radius Available (inches) | True-Track |
2" Chanex Oregon Bend | 8" 10" 12" 14" 16" | - - - - - |
3" Chanex Oregon Bend | 8" 8" 10" 10" 12" 12" 16" 16" | - Yes - Yes - Yes - Yes |
3.5" Chanex Oregon Bend | 8" 10" 12" 14" 16" | - - - - - |
4" Chanex Oregon Bend | 8" 10" 12" 14" 16" | Yes Yes Yes Yes Yes |
4.5" Chanex Oregon Bend | 8" 10" 12" 14" 16" | - - - - - |
Plastic Bottling & Packaging Sprockets NZ
We are able to supply or manufacture a range of plastic sprockets to suit a variety of flat top & multi-flex bottling & packaging chains.
CAD & CNC capabilities to custom manufacture your plastic sprockets.
Available in a range of materials to suit the application environment. Solid or split type configurations. Drive and idler wheels.
Straight Flat Top | Side Flex Flat Top | Multi Flex Bi-Planner |
803 815 820 821 828 831 881 915 2815 8257 9157 | 879 880 881 882 878 879 981 982 | CC600 1700 1701 1702 1710 |
Did you know?
Supply Services Limited is one of the largest sprocket suppliers in NZ?
We are able to design, fabricate or import sprockets and plates to suit any type of chain used in NZ.
Contact our team to discuss your application requirements, design your sprocket and then bring them to life.
If we don’t have it, we source worldwide for your convenience from our extensive array of international suppliers.
We offer a complete range of engineering services. Full service, from start to finish.
Check out a recent blog post about Sprockets for New Zealand Industry.
Replace your sprockets and chain at the same time?
Just a sales pitch? No, it’s to extend your chain life!
You only want to buy chain, but you are constantly bombarded with “you should replace your sprockets also”.
This isn’t a sales pitch, this is decades of experience that we try and impart onto our customers.
Many a time this advice is not taken, only for the customer to complain down the track that their new chain is starting to rapidly wear. Well…
Without replacing your sprockets all you are going to do is cause premature wear on your new chain.
Very quickly you will find you are replacing that new chain and often will see wear in the same places over the length of the chain.
To get the best out of new chain, make sure your sprockets are aligned correctly and you are using quality wear strip.
New chain should always be run on new sprockets.
Even if the sprockets are only slightly out of pitch, or have the smallest of “hook” to the teeth, these sprockets will dramatically reduce chain service life.
Download our latest chain and sprocket brochure for NZ
Or have a quick skim through this blog post about our chain and sprocket brochure.
It takes a lot of sprockets to keep NZ industry moving…
Some of our recent sprockets for NZ based customers.
Our Locations - Contact Us Now
Supply Services Christchurch
Monday | 7:30 AM - 5:00 PM |
Tuesday | 7:30 AM - 5:00 PM |
Wednesday | 7:30 AM - 5:00 PM |
Thursday | 7:30 AM - 5:00 PM |
Friday | 7:30 AM - 5:00 PM |
Saturday | Closed |
Sunday | Closed |
Supply Services Auckland
Monday | 7:30 AM - 5:00 PM |
Tuesday | 7:30 AM - 5:00 PM |
Wednesday | 7:30 AM - 5:00 PM |
Thursday | 7:30 AM - 5:00 PM |
Friday | 7:30 AM - 5:00 PM |
Saturday | Closed |
Sunday | Closed |
Supply Services Mount Maunganui (HQ)
Monday | 7:30 AM - 5:00 PM |
Tuesday | 7:30 AM - 5:00 PM |
Wednesday | 7:30 AM - 5:00 PM |
Thursday | 7:30 AM - 5:00 PM |
Friday | 7:30 AM - 5:00 PM |
Saturday | Closed |
Sunday | Closed |