>>> We are looking for passionate people to join our nationwide team <<<

Close Button
Acetal PE Blend (POM-C + 10PE) Polyacetal

Acetal PE Blend (POM-C + 10PE)

Acetal PE Blend is an Acetal POM-C material modified with the addition of a solid lubricant being 10% polyethylene (PE). This alters the properties of the base Acetal POM-C which improves sliding and frictional properties, in-turn allowing for enhanced wear characteristics. The solid lubricant can slightly reduce strength and hardness of the base Acetal POM-C material, making application selection important.

  • Improved friction & abrasion resistant properties
  • High strength, rigidity and toughness
  • Solid lubricant for sliding properties
Download Specs Enquire about this product



20mm to 200mm OD




10mm to 100mm Thick


Light Blue

Modified Grades


Cut to size

Yes, however some sizes have minimum order quantity


Tribological Advantages

Does your application require the amazing technical properties of Acetal POM-C but needs a lower coefficient of friction? Are your current Acetal parts wearing out quicker than expected due to increased sliding requirements? Then our Acetal Polyethylene Blend is the material that will allow your components to glide with its exceptional sliding properties.

Food Contact Approved

Just like our Acetal range, our selection of Acetal Polyethylene Blend materials are FDA approved for applications that require approval for direct food contact. Also being blue in colour assists with optical detection of contaminants in food processing lines.


Components requiring high strength and stiffness with dimensional stability and above all - reduced friction. Examples such as sliding bearings or plates, components that require food contact approved materials such as wear strips, gears or rollers. Widely used where mating with stainless steel but require reduced friction.

Acetal PE Blend Properties

Long Term Service Temp
Temperature - Long Term Service Temp-40ºC to +100ºC
Moisture Absorption
Low - Moisture Absorption
UV Stable
No - UV Stable
Compressive Strength
High - Compressive Strength
Impact Strength
Medium - Impact Strength
Tensile Strength
Medium - Tensile Strength
Coefficient of Friction
Low - Coefficient of Friction
Abrasion Resistance
Medium - Abrasion Resistance
Medium - Cost

Acetal PE Blend Range

Product TypeIndustry UsageAvailable Products & Notes
Acetal PE BlendMechanical Engineering, Electronics, Automotive, Food Manufacturing & Processing technologiesRod & Sheet
Light Blue
FDA Compliant

Did You Know?

We possibly hold the largest range of Acetal stock shapes in New Zealand in rod, tube and sheet. We have available a range of sizes and colours to suit almost every application.

Take a look at this recent blog post about our extensive range of Acetal POM engineering plastic materials that will meet and exceed your application requirements.

Back to top