Sharp Top Chains
CAN-AM Sharp Top Chains exceed ANSI & BS standards & are superior replacements for new & existing sharp top roller chain applications. Competitively priced & readily available for any standard applications. A range of pitch sizes, strand widths & points per pitch in standard & narrow series. Non-marking & custom options available.
- Available in one, two, three, four, five & six stand variations
- Range of sidebar profiles - points per pitch, profiles & point directions
- Low profile tips reduces bruising & precise tooth sharpness for increased grip
Availability
Pitch Sizes
3/4" to 2"
Strands
Simplex, Duplex, Triplex & more
Lengths
10ft boxes & 50ft rolls
Connector Links Available
Yes
Attachments Available
Yes
Sprockets Available
Yes
Features
Precision Ground Bottom
The underside of the chain can be ground flat for precision alignment and enhanced wear life against the chain guide plates.
Chrome Hardened Pins
Additional super hard chrome coated pins for increased wear life.
Induction Hardened Sharp Tops
Additional induction hardening of the sharp top teeth for enhanced wear life over the standard side plate hardness.
Sharp Top Range
| Pitch Size (inches) | American Standard | British Standard |
| 3/4" | 60-1 ST 60-2 ST | 12B-1 (5 PEP) 12B-2 (5 PEP) |
| 1" | 80-1 ST 80-2 ST 80-3 ST 80-4 ST 80-1 SLL 80-2 SLL 80-3 SLL 80-4 SLL 80-2 (5 PEP) 80-3 (5 PEP) 80-4 (5 PEP) 80-3 W2P 80-3 W4P 80-2 (4 PEP) | 16B-1 (5 PEP) 16B-2 (5 PEP) |
| 1 1/4" | 100-1 ST 100-2 ST 100-3 ST 100-1 SLL 100-2 SLL 100-3 SLL | 20B-1 (5 PEP) 20B-2 (5 PEP) |
| 1 1/2" | 120-1 ST 120-2 ST 120-4 ST | 24B-1 (5 PEP) 24B-2 (5 PEP) |
| 2" | 160-1 DP | 32B-1 Narrow 32B-1 Standard |
Suppliers
Roller Chain Sprockets
ANSI and BS precision roller chain sprockets can be supplied with teeth that are flame heat treated, case hardened, induction hardened or not hardened at all. The surface finish can be plain, painted, zinc plated or black passivated.
Connector Links & Pins
Roller chain accessories to suit simplex, duplex, triplex roller chains. Connecting links, roller links, spring clips & cotter pins.
UHMWPE Premium
Premium abrasion resistant grade of Ultra High Molecular Weight Polyethylene UHMWPE. Further enhanced with either silicone (XLS) for release and slip, or with glass (GXL) for unparalleled wear resistance. POLYSLICK™ XL grades are UV stabilised and have reduced thermal expansion.
ARMOUR-X® Wear Plate
ARMOUR-X® wear plate reduces costs by extending wear life and reducing installation frequency. The superior abrasion resistance of ARMOUR-X® is achieved through 21st century alloy steel technology. The result is a formable, weldable wear plate in the 450BHN range that offers abrasion resistance almost twice that of conventional 500BHN grades.
Welded Steel Drag Chains
Welded Steel Drag chains provide efficient and economical service when used in chip and waste conveyors. Various through and induction hardening options allow you to tailor the chain to the application. Super Hog thick wall barrel and Whole Hog round barrel chains are available for heavy duty applications such as chip reclaims and debarker infeeds.
Welded Steel Mill Chains
Welded Steel Mill chains provide an economical and superior method for conveying most materials. They are most common in the lumber, pulp & paper, plywood, OSB and other board mills. Other applications include bucket elevators and bulk material handling. Various through and induction hardening options allow you to tailor the chain to the application.
Whatever you’re
engineering, we can help.
Our technical solutions specialists are only a phone call away
